Camp Power SIM-700 - Turning off Steps

To Next Page

To Previous Page

2. Please ensure the PV solar panel is properly conncted (positive/

negative and voltage parameters consistent with the product

identication), and then turn on the solar input switch.

3. Press the button “On/Off” for 3 seconds, and start the inverter.

4. Turn on the solar panel input switch, and it will charge automatically.

5.4 Turning off steps

1. Turn off the loads or unplug.

2. Press the shut-down (“Off”) manually for 3 seconds, and cut the

output.

3. Unplug the power AC input cord.

4. Turn off the switch of solar panel on the real panel (If no need Solar

panel charging).