Campbell Hausfeld PW1625 User Manual (English)

Other manuals for Campbell Hausfeld PW1625

Operating Instructions And Parts Manual44 pages

Questions and Answers:

D
Diamond HowardAug 15, 2025
What to do if my Campbell Hausfeld PW1625 Pressure Washer doesn't start up?
- J
  John ChangAug 15, 2025
  If your Campbell Hausfeld pressure washer doesn't start, first check if the GFCI has tripped and push the reset button on the plug. Then check the plug, socket, and fuses to ensure they are working correctly. Remove any extension cords, as the product should not be used with one. Also, verify that the main supply voltage is adequate. Finally, if the thermal safety switch has tripped, switch off the unit and allow the motor to cool down.
J
Joshua NavarroAug 18, 2025
Why is my Campbell Hausfeld Pressure Washer losing pressure after some use?
- K
  Kathryn BaldwinAug 18, 2025
  If your Campbell Hausfeld pressure washer's pressure drops after a period of normal use, it could be due to a worn nozzle. Check the nozzle and replace it if necessary. Alternatively, the nozzle might be in a low PSI position; adjust it to the high-pressure position.
C
Cynthia RobinsonAug 21, 2025
How to fix low pressure in my Campbell Hausfeld Pressure Washer?
- C
  Christopher DaltonAug 22, 2025
  If your Campbell Hausfeld pressure washer has low pressure or the pump runs rough, the issue might be a worn or wrong-sized nozzle; replace it with the proper size. The inlet filter on the pump could be clogged, so clean it and check it more frequently. A restricted inlet could also be the cause; check the garden hose for collapses or kinks and ensure adequate inlet water flow. A leaking high-pressure hose can also cause low pressure, so replace it if necessary. Finally, ensure hoses and fittings are tight to prevent the pump from drawing in air.
A
Andrea StarkAug 26, 2025
Why is my Campbell Hausfeld PW1625 Pressure Washer pressure fluctuating?
- S
  stewartheatherAug 26, 2025
  If your Campbell Hausfeld pressure washer has fluctuating pressure, ensure hoses and fittings are tight and purge air from the garden hose, as the pump may be drawing in air. Also, the nozzle might be clogged; clean or replace it.
T
turnerwilliamAug 28, 2025
Why is my Campbell Hausfeld PW1625 pump noisy?
- M
  Michael McbrideAug 28, 2025
  If your Campbell Hausfeld pressure washer pump is noisy or running rough, ensure fittings are tight and increase water pressure, as the pump may be drawing in air or have a low water supply. If the water is too hot, reduce the temperature below 100° F.
K
Karen SandersAug 31, 2025
Why is my Campbell Hausfeld PW1625 Pressure Washer motor stopping suddenly?
- M
  Melissa HendersonSep 1, 2025
  If the motor of your Campbell Hausfeld pressure washer stops suddenly, remove any extension cords, as the product should not be used with an extension cord. Also, the thermal safety switch may have tripped due to overheating. Check that the main supply voltage corresponds to the specifications.
T
Taylor BrowningSep 4, 2025
What to do if my Campbell Hausfeld PW1625 won't spray detergent?
- L
  Lori RogersSep 4, 2025
  If your Campbell Hausfeld pressure washer will not spray detergent, adjust the nozzle to the soap position. Check the detergent suction hose for clogs, kinks, or holes; clean, unkink, or replace the hose if necessary. Also, use only the hose length provided with the initial purchase of the pressure washer.
S
sherryolsonSep 7, 2025
What causes strong surging and low pressure in my Campbell Hausfeld Pressure Washer?
- C
  Christine MartinSep 7, 2025
  If your Campbell Hausfeld pressure washer experiences strong surging at the inlet and low pressure, foreign particles may be in the inlet or discharge valves. Clean or replace the valves and contact a service center.
S
Sheri BennettSep 12, 2025
Why does my Campbell Hausfeld PW1625 unit begin to smoke?
- R
  Ricky BentleySep 12, 2025
  If your Campbell Hausfeld pressure washer unit begins to smoke, turn off the unit and call 1-800-330-0712. This could be due to an overheated, overloaded, or damaged motor.