Need help?Do you have a question about the Canature WaterGroup 95MTS and is the answer not in the manual?
Highlights the system's advanced design and performance advantages over traditional products.
Details how the system optimizes salt and water usage for regeneration and maintains high water quality.
Describes optional features like Polishing Recycle Rinse, Battery Back Up, and Remote Start.
Specifies tank size, injector sets, and brine/drain line flow controls for MTS95 softeners.
Lists recommended filter valve configurations based on tank diameter for optimal performance.
Guidelines for locating the system, performing plumbing, and connecting drain lines with air gaps.
Explains the operation of the MENU, SET/REGEN, and DOWN/UP buttons for system control.
Instructions for connecting power, data cables, and setting valve positions for regeneration.
Steps for flushing media, checking brine draw, and ensuring proper rinse cycles.
Illustrates the information presented on the main controller's display screen.
Identifies and shows the location of major components like valves, controllers, and pumps.
Guide on using the MENU, SET, UP, and DOWN buttons to navigate system settings.
Procedures for configuring essential system parameters like date, time, region, and language.
How to choose the system type (Softener, Filter) and its operational modes.
Explains how the softener operates based on water demand and tank sequencing.
Details on Time Clock, Meter Delay, Meter Immediate, and Pressure Drop filter operations.
Setting up softener specifics including total units, resin volume, and refill rate.
Adjusting the number of units, resin per unit, and refill flow rate (DLFC).
Selecting High Efficiency, Standard Efficiency, or High Capacity salt settings.
Entering concentrations for Hardness, Iron, and Manganese in the feed water.
Customizing Backwash, Brine, Rinse, and Refill times for regeneration cycles.
Introduction to advanced settings like Trip Point, Peak Period Block Out, and Auxiliary Outputs.
Configuring flow rates and delay times that trigger additional tanks to come online.
Setting specific times of day to prevent regeneration, ensuring service continuity.
Setting up remote start switches and auxiliary relays for system control.
Adjusting salt usage efficiency and minimum residual capacity for regeneration scheduling.
Configuring the volume and time for the chemical pump based on water flow.
Setting minimum flow rate and duration for the product water recycle pump.
Overview of different filter system types and their associated programming menus.
Setting the time of day for regeneration and choosing regeneration schedule methods.
Modifying the total number of units and the system's gallon capacity setting.
Adjusting trip point and delay for pressure-based regeneration in filter mode.
Modifying Backwash and Rinse times for all tanks in the system.
Accessing Peak Period Block Out, Auxiliary Outputs, and Chemical Pump settings.
Explanation of how to configure periods where regeneration is not permitted.
Introduction to configuring remote start switches and auxiliary relays.
Detailed steps for setting up immediate, delayed, or held remote regeneration starts.
Programming relay outputs for regeneration duration or specific functions like chemical pumps.
Specific values for trip delay, flow rates ON/OFF for tank activation.
Advanced configuration for relay outputs across different cycles.
Detailed settings for chemical pump operation and product water polishing.
Procedures for formatting and resetting slave and master control boards.
Erasing history data and settings from slave control boards.
Procedures for restoring settings and history from slave PCBs to the main PCB.
General wiring diagram for connecting MTS softener or filter systems.
Detailed wiring diagrams for master and slave controllers in multi-unit systems.
Wiring diagram specific to systems equipped with the polishing recycle feature.
Wiring diagram for filter systems utilizing a pressure differential switch.
Step-by-step guide for manually detaching the power head assembly.
Instructions for detaching the power head assembly using automatic valve movement.
Steps for removing and replacing the Drain Line Flow Control component.
Steps for removing and replacing the Brine Line Flow Control component.
Detailed instructions for removing and replacing injector components.
Guidance on cleaning injector parts, including using mild acid solutions.
Details and identification of the MTS slave valve unit.
Part numbers and descriptions for the main controller and various communication cables.
Information regarding the MTS power transformer, including input and output specifications.
An illustrated exploded view showing all components of the power head assembly.
Comprehensive list of part numbers and descriptions for the 95MTS powerhead.
List of system components not shown in the exploded view, including controllers and valves.
An illustrated exploded view detailing the components of the valve body.
Detailed list of part numbers and descriptions for the 95STS/MTS valve body.
Lists various part numbers for DLFCs, connectors, and injector throat/nozzle options.
Part numbers for BLFC options and connectors for tubing to the brine line.
Diagnosing and resolving problems preventing the unit from starting a regeneration cycle.
Troubleshooting steps for hard water issues and high salt consumption.
Addressing low water pressure, resin in drain line, and brine draw problems.
Troubleshooting continuous valve cycling and unexpected beeping sounds.
A log sheet for recording yearly maintenance tasks performed on the system.
A log sheet for recording monthly maintenance checks and observations.
A log sheet for recording weekly maintenance activities and regeneration counts.
A log sheet for recording daily checks on brine tank, water hardness, and alarms.
A log to track the number of regenerations and weight of salt added to each brine tank.
Details the warranty periods for various components of the assembled unit.
Outlines conditions that may void the warranty, such as misuse or improper installation.
General| Brand | Canature WaterGroup |
|---|---|
| Model | 95MTS |
| Category | Water Dispenser |
| Language | English |
To Next Page