Need help?Do you have a question about the C&K systems S802 and is the answer not in the manual?
General| Zones | 8 |
|---|---|
| Partitions | 2 |
| Weight | 1.5 kg |
| Enclosure Rating | IP30 |
| Dimensions | 80mm |
Step-by-step instructions for physically mounting the control panel securely.
Critical warnings and guidelines for mains connection, battery, and detector circuits.
Details the 6-core cable requirement and connection method for remote keypads.
Guides through initial power-up sequence, silencing alarms, and enabling tamper loop.
Explains how to enter and navigate the programming mode for system setup.
How to set the exit time duration (10-90 seconds) for arming the system.
Reprogramming circuits 2-7 for specific functions like Alarm, Fire, or Entry Route.
How to change the default engineer access code (7890).
Performing system tests such as sounder, strobe, and full load tests.
Step-by-step guide to reset the panel's programming to factory defaults.
Procedure to restore factory default user and engineer codes.
Lists common problems, their causes, and solutions for system issues.
To Next Page
