C&K systems System 2316 - What the Sounds Mean

7
*Not available on System 236/236i
SOUND MEANING
2 beeps system armed or disarmed
.
successful central station test or battery test
.
5 beeps
unauthorized command attempted
error changing PIN number
wrong PIN number entered
.
.
.
.
.
continuous tone, beeping fast for last ten seconds entry delay time
continuous beeping, speeding up for last ten seconds exit delay time
2 second beep door chime
ring back after closing report*
.
.
.
zone faulted during walk-test
.
chirping (1 second on, 4 seconds off) chirp alert warning: system is armed, but a delay zone is faulted; you
must disarm the system before entry delay expires or alarm will occur*
.
alarm signal for zone programmed for chirping bell or siren
.
continuous tone alarm signal for zone programmed for steady bell or siren
circuit malfunction (trouble on supervised loops only)
.
.
pulsed tone (2 seconds on, 2 seconds off) alarm signal for zone programmed for pulsed bell or siren
.
invalid function