C&K systems System 236i - Central Station Test

37
The display will read TEST REPORTING.
CENTRAL STATION TEST
This option tests the reporting capability of your system by sending a test
message to the central station. Weekends are the best time for the CENTRAL
STATION TEST. To schedule one, call our central station at:
OPTION
INSTALLED
CENTRAL STATION
To initiate the CENTRAL STATION TEST:
Enter your PIN (if required),
push the key, enter the digit "6",
the digit "1", then push the # key.
6 1
PIN
REQUIRED
.
If the test message was successfully transmitted to
the central station, the keypad will beep twice, and the display will read TEST - PASSED.
.
If the test message was not successfully transmitted to the central station, the
keypad will beep five times, and the display will read TEST - FAILED. Call our Service
Department for assistance.
.
*
#
*