Why my Candy CBW 48TWME-S does not work / start?
If your Candy Washer doesn't start, ensure it's plugged into a working socket and that the power is on. Test the socket with another appliance. Also, make sure the door is correctly closed, the program is properly selected, the start button is pressed, and that the machine isn't in pause or time delay mode.
What to do if Candy CBW 48TWME-S Washer does not spin?
If your Candy Washer isn't spinning, first remove and de-tangle the load, then reload and restart the spin program. Ensure that the water has completely drained. Also, check that the 'no spin' function isn't selected and that you're using the correct amount of detergent, as excessive detergent can impede the spin cycle. Check the selected options and their effect on the spin cycle. If the problem persists, refer to Error 3 section.
What to do if water leaked on the floor near Candy CBW 48TWME-S?
If you see water leaking near your Candy Washer, it could be from a faulty seal between the tap, supply hose, and fill valve. Try replacing the seal and tightening the hose connections. Also, check that the front filter is correctly closed.
Why strong vibrations / noises are heard during the spin cycle of Candy CBW 48TWME-S Washer?
Loud noises or strong vibrations during the spin cycle of your Candy Washer may occur if the appliance isn't level. Adjust the feet as needed. Also, ensure that the transport screws, rubber bungs, and spacer tubes have been removed and that there are no foreign objects inside the drum.
What to do if Candy CBW 48TWME-S shows error E3 (with display) 3 flashes of the LEDs (without display)?
If your Candy Washer displays error 'E3' or shows 3 LED flashes, check that the filter isn't clogged and that there are no foreign objects in the filter compartment. Ensure the drain hose isn’t bent or trapped and that the home drainage system isn't blocked. Try draining water in the sink to test the drainage.
How to fix Candy CBW 48TWME-S error E2 (with display) 2 flashes of the LEDs (without display)?
If your Candy Washer displays 'E2' or the LEDs flash twice, ensure the water supply tap is open and the supply hose isn’t bent or trapped. Check that the drain pipe is at the correct height. Close the tap, unscrew the filler hose, and clean the anti-sand filter. Also, inspect the filter for clogs or foreign objects.
How to resolve Candy CBW 48TWME-S error E7 (with display) 7 flashes of the LEDs (without display)?
If your Candy Washer displays 'E7' or the LEDs flash 7 times, make sure the door is correctly closed and that clothes aren't preventing it from fully closing. If the door is locked, turn off and unplug the washer, wait 2-3 minutes, and then reopen the door.
What to do if Candy CBW 48TWME-S Washer shows error E4 (with display) 4 flashes of the LEDs (without display)?
If your Candy Washer displays 'E4' or flashes the LEDs 4 times, make sure you are using the correct amount of detergent and that the detergent is designed for use in a washing machine.
Covers electrical connections and safety precautions for appliance use.
Details on how to mount the furniture door to the washing machine.
Explains water supply connections, including features like Aquastop and Aquaprotect.
Guidance on positioning and leveling the washing machine correctly.
Advice on sorting laundry and preparing items for washing.
Guidance on efficient usage to save money and protect the environment.
Tips and advice on selecting and using the correct amount of detergent.
Instructions for cleaning the washing machine's outer cabinet.
How to regularly clean the detergent drawer to prevent residue buildup.
Guide on checking and cleaning the pump filter to prevent blockages.
Recommendations for preparing the appliance for moves or long periods of non-use.
Steps for turning on the machine and selecting the required wash program.
Information on water pressure, spin speed, and power requirements.
How to use the programme selector, start, pause, cancel, and set delay start.
How to select additional options like prewash and adjust rapid/stain levels.
Control temperature, spin speed, and use special functions like Night & Day.
Understanding display indicators and activating the key lock for safety.
Explains error code formats and lists common error codes with solutions.
Details other common problems like no start, leaks, or vibrations and their solutions.
Details on product guarantee terms, conditions, and how to obtain assistance.
General| Door hinge | Left |
|---|---|
| Motor type | Brushless |
| Water fill | Cold |
| Drum volume | 58 L |
| Control type | Rotary, Touch |
| Display type | LED |
| Loading type | Front-load |
| Tub material | Plastic |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Illumination color | Red |
| Appliance placement | Built-in |
| Drum capacity | 8 kg |
| Cycle time (max) | 218 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 75 dB |
| Noise level (wash) | 48 dB |
| Number of washing programs | 16 |
| Add garment (pause) function | No |
| Power plug type | Type F |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 44 L |
| Energy consumption washing per cycle | - kWh |
| Package depth | 570 mm |
| Package width | 650 mm |
| Package height | 875 mm |
| Package weight | 66100 g |
| Repairability index | 8 |
Weight and Dimensions| Depth | 530 mm |
|---|---|
| Width | 600 mm |
| Height | 820 mm |
| Weight | 64100 g |
| Installation compartment height | 830 mm |
To Next Page
