8
LOADING THE RINSE AID
The rinse aid
The rinse aid, which is automatically released during the last rinsing cycle, helps the dishes to dry quickly and
prevents spots and stains forming.
Filling the rinse aid container
The rinse aid container can be found to the left of the detergent container (fig. A "3").To open the lid, push the
reference mark and, in the same time, pull the tab of opening.It is always advisable to use rinse aid that is specifically
designed for dishwasher.Check the rinse aid level through the indicator eye (C) which is located on the dispenser.
Regulating the rinse aid from 1 to 6
The regulator (D) is placed under the lid and can be turned using a coin.The recommended position is 4.The
limestone content of the water considerably affects the formation of limescale and the drying performance.
It is therefore important to regulate the quantity of rinse aid to achieve good washing results.If, after the wash,
streaks occur on the dishes, decrease the amount by one position. If whitish spots occur, increase the amount
by one position.
To Next Page
Loading...
Need help?
General
