Candy CDP 2L1049W-80 - User Manual

Questions and Answers

A
Andrew KempAug 2, 2025
Why Candy Dishwasher doesn't start?
- S
  Shane ConradAug 2, 2025
  Your Candy Dishwasher might not be starting due to several reasons. Ensure the power supply is on and the dishwasher door is properly closed. Also, check that the power cord is correctly plugged into the wall socket, and the water supply is connected and turned on. Inspect the drain hose for any kinks, and make sure the filter combination is correctly fitted and clean. Check the coarse filter and the kitchen sink for clogs. Finally, ensure you are using special dishwasher detergent to avoid suds.
L
Lauren BooneAug 7, 2025
What to do if my Candy Dishwasher has unsatisfactory washing results?
- J
  Jamie ReedAug 7, 2025
  If you're experiencing unsatisfactory washing results with your Candy dishwasher, consider the following: Try using a more powerful program. Check the detergent dispensing to ensure enough detergent was dispensed. Rearrange items that might be blocking the spray arms. Clean and correctly fit the filter combination in the base of the wash cabinet. If you have soft water, select an appropriate amount of detergent. Avoid using aluminum utensils, and ensure items do not block the detergent cups. Load according to the suggestions in the directions. Increase the rinse-aid amount. Wait before removing dishes. Choose the appropriate cycle. Avoid use of cutlery with a low-quality coating.
J
John ColeAug 12, 2025
What to do if my Candy CDP 2L1049W-80 is not cleaning dishes properly?
- B
  Brittany MorenoAug 12, 2025
  If your Candy dishwasher isn't cleaning dishes well, consider these points: Ensure dishes are loaded correctly. Select a more intensive program. Use more detergent, or switch to a different detergent. Rearrange items so the spray can rotate freely. Clean and correctly fit the filter combination. Clean the spray arm jets. If you have soft water, use less detergent and select a shorter cycle for glassware. Use a mild abrasive cleaner to remove marks. Load the dishwasher as suggested in the directions. Increase the amount of rinse-aid/refill the rinse-aid dispenser. Don't empty the dishwasher immediately after washing; open the door slightly to let steam escape. Choose a program with a longer washing time. Be aware that some cutlery or dishes may not be suitable for dishwasher cleaning.
A
Amanda RogersAug 17, 2025
What to do if there are suds in my Candy CDP 2L1049W-80?
- J
  joann64Aug 17, 2025
  If you find suds in your Candy dishwasher, open the dishwasher and let the suds evaporate. Add 1 gallon of cold water to the tub, then close and latch the dishwasher. Select any cycle; the dishwasher will drain the water. After draining, open the door and check if the suds have disappeared. Repeat if necessary.
M
Mark BoydAug 21, 2025
Why is there detergent left in the dispenser cups of my Candy CDP 2L1049W-80?
- B
  bowenmarkAug 21, 2025
  If you find detergent left in the dispenser cups of your Candy Dishwasher, it might be because items are blocking the path of the spray arms. Try rearranging the items inside the dishwasher.
M
Matthew TranAug 27, 2025
What to do if the fuse is blown in my Candy CDP 2L1049W-80?
- M
  Miranda TurnerAug 27, 2025
  If the fuse is blown or the circuit breaker has acted up in your Candy dishwasher, replace the fuse or reset the circuit breaker. Also, remove any other appliances that are sharing the same circuit with the dishwasher.

Summary

Safety Information

General Safety Precautions

Important safety guidelines for using the dishwasher, including intended use and user restrictions.

Earthing Instructions

Details on proper grounding of the dishwasher to prevent electrical hazards.

Quick Operation Guide

Step-by-Step Operation Overview

A concise guide to operating the dishwasher, covering switching on, loading, program selection, and unloading.

Prior to First Use

Water Softener and Salt Adjustment

Steps to set up the water softener and adjust salt consumption based on water hardness.

Loading Salt into the Softener

Procedure for filling the salt container with dishwasher salt to protect the softener.

Loading the Detergent

Maintenance and Cleaning

Filter System Maintenance and Cleaning

General Appliance Care

Installation Instruction

Appliance Positioning and Power Connection

Water Supply and Drain Hose Connections

Troubleshooting Tips

General Troubleshooting Guide

Troubleshooting guide for technical issues, general problems like suds, and noise.

Washing and Drying Performance Issues

Solutions for dishes not being clean, cloudy glassware, marks, and drying problems.

Error Codes and System Malfunctions

Explanation of error codes displayed by the appliance and actions for overflow.

Candy CDP 2L1049W-80 Specifications

General

Door color	White
Control type	Buttons
Product size	Full size (60 cm)
Built-in display	No
Custom panel-ready	-
Appliance placement	Freestanding
Baskets adjustable placement	Upper
Current	10 A
AC input voltage	230 V
Water consumption per cycle	- L
Energy consumption per cycle	0.74 kWh
Cycle time	- min
Noise level	49 dB
Drying system	Condensation
AquaStop function	Yes
Delay start (max)	9 h
Number of place settings	10 place settings
Number of washing programs	5
Drying class	A
Annual water consumption	2520 L
Annual energy consumption	211 kWh
Package weight	42350 g