1. Press the slider control of which cooking zone you want to
set the timer for.
2. Set the time by touching “+” “-”.
Press the “+” once increases the time by one minute, Press the
“-” once decrease the time by one minute. When the set time
exceed 99 minutes, it will automatically return to “00”, if the “-”
and “+” keys are pressed simultaneously, the indicator will
display “00”.
3. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
NOTE: There will be a red dot in the right bottom corner of power level indication
which indicating that zone is selected.
4. When cooking timer expires, the corresponding cooking zone will be switch off
automatically.
Note: Other cooking zones will keep operating if they are turned on previously.
If the timer is set on more than one zone:
1. When you set timer for several cooking zones, red dots of the relevant cooking
zones are indicated. The timer display shows the min. timer. The dot of the
corresponding zone blinks.
(set to 15 minutes)
(set to 45 minutes)
2. Once the countdown timer expires, the corresponding zone will switch off. Then it
will show the new min. timer and the dot of corresponding zone will flash.
To Next Page
Loading...
