3. Set the time by touching the slider control of the
timer (e.g.5).
4. Touch timer control again, the “1” will flash.
5. Set the time by touching the slider control (e.g.9),
now the time you set is 95 minutes.
6. When the time is set, it will begin to count down
immediately. The display will show the remaining time.
7. Buzzer will bips for 30 seconds and the timer indicator
shows“-- “ when the setting time finished.
Using the timer to switch off one or more cooking zones
1. Touching the heating zone selection control that you want
to set the timer for.
2. Touch timer control, “10” will show in the timer display
and “0” will flashes.
3. Set the time by touching the slider control of the
timer (e.g.5).
4. Touch timer control again, the “1” will flash.
To Next Page
Loading...
