Candy CNCQ2T620EX - Installation

EN
Installation
Environmental conditions
The room temperature should always be between 10° C and 43° C ,for this refrig-
erator,such as, CNCQ2T620EX、CNCQ2T620EW、CNCQ2T618EX、CNCQ4T618EW
、CNCQ4T618EB; either or the room temperature should always be between 10° C
and 38° C ,for this refrigerator, for example, CNCQ2T620DX、CNCQ2T620DW , since it
can inuence the temperature inside the appliance and its energy consumption. Do
not install the appliance near other heat-emitting appliances (ovens, refrigerators)
without isolation.
WARNING!
▶ The appliance is heavy. Always handle with at least two persons.
▶ Keep all packaging materials out of children´s reach and dispose them in an en-
vironmentally friendly manner.
▶ Take the appliance out of the packaging.
▶ Remove all packaging materials.
Ventilaton cross-section
To achieve sucient ventilation of the
appliance for safety reasons, the infor-
mation of the required ventilation cross
sections must be observed.
Aigning the appliance
The appliance should be placed on a at
and solid surface.
1. Tilt the refrigerator slightly back-
wards.
2. Set the feet to the desired level.
Make sure the distance to the wall on
the hinge side is at least 100 mm for the
door to open properly.
918
1220
Space requirement
Required space when door is opened.
1. 2.
100 mm
100 mm
100 mm
50 mm
27