Candy COS 125 D - Chapter 5: Setting Up and Installation; Initial Setup and Transit Screw Removal

16
SL
55.. PPOOGGLLAAVVJJEE
NAMESTITEV IN
PRIKLJUâITEV
STROJA
Stroj brez podstavka
postavite v bliÏino mesta,
kjer bo stalno prikljuãen.
Previdno prereÏite
jermenãek, ki pridrÏuje
prikljuãni kabel in odtoãno
cev.
Odvijte 4 vijake (A) in
odstranite 4 podloÏke (B).
Zakrijte luknje s priloÏenimi
pokrovãki; na‰li jih boste v
vreãki z Navodili za
uporabo.
OPOZORILO:
DELOV EMBALAÎE NE
SMETE PU·âATI NA
DOSEGU OTROK, KER JE
ZANJE LAHKO ZELO
NEVARNA! PROSIMO,
DA EMBALAÎO
ODLOÎITE V SKLADU Z
VELJAVNIMI
OKOLJEVARNOSTNIMI
PREDPISI!
EN
CHAPTER 5
SETTING UP
INSTALLA
TION
Move the machine near its
permanent position without
the packaging base.
Carefully cut the securing
strap that holds the main
cord and the drain hose.
Remove the 4 fixing screws
marked (A) and remove the
4 spacers marked (B)
Cover the 4 holes using the
caps provided in the
instruction booklet pack.
WARNING:
DO NOT LEAVE THE
PACKAGING IN THE
REACH OF CHILDREN
AS IT IS A POTENTIAL
SOURCE OF DANGER.