Make sure the cooktop is turned on.
Note: you can use the minute minder at least one zone shall
be active.
Touch timer control, the “10” will show in the timer display.
and the “0” flashes.
Set the time by touching the slider control. (e.g. 5)
Touch timer control again, the “1” will flash
Set the time by touching the slider control (e.g.9), now the
timer you set is 95 minutes.
When the time is set, it will begin to count down immediately. The display will show the remaining time
Buzzer will beep for 30 seconds and the timer
indicator shows “- -” when the setting time finished.
b) Setting the timer to turn one cooking zone off
Set one zone
Touching the heating zone selection control that you want to
set the timer for.
In short time, touch timer control, the “10” will show in the
timer display and the “0” flashes.
To Next Page
Loading...
