To Next PageTo Next Page
Need help?Do you have a question about the Candy CTPS64SCTTWIFI and is the answer not in the manual?
General| Hob type | Zone induction hob |
|---|---|
| Hob cover | No |
| Frame type | Frameless |
| Product color | Black |
| Hob width size | 59 cm |
| Top surface type | Glass-ceramic |
| Appliance placement | Built-in |
| Cooking zone 1 boost | 2600 W |
| Cooking zone 1 power | 2000 W |
| Cooking zone 1 shape | Rectangular |
| Cooking zone 2 boost | 1800 W |
| Cooking zone 2 power | 1500 W |
| Cooking zone 3 shape | Round |
| Flexible cooking zone | Yes |
| Cooking zone 1 position | Left front |
| Cooking zone 2 position | Left rear |
| Cooking zone 3 diameter | 180 mm |
| Cooking zone 3 position | Right front |
| Cooking zone 4 position | Right rear |
| Number of cooking zones | 4 zone(s) |
| Cooking zone 1 power source | Electric |
| Cooking zone 1 size (W x D) | 180 x 180 mm |
| Number of gas cooking zones | 0 zone(s) |
| Boost flexible cooking zone 1 | 3500 W |
| Number of flexible cooking zones | 1 zone(s) |
| Flexible cooking zone 1 size (W x D) | 400 x 210 mm |
| Number of simultaneously used cooking zones | 4 |
| Timer type | Digital |
| Control type | Touch |
| Control position | Top front |
| Number of power levels | 9 |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | - W |
| Connected load (electric) | 7400 W |
| Country of origin | China |
| Package depth | 635 mm |
| Package width | 690 mm |
| Package height | 115 mm |
| Package weight | 12000 g |
Weight and Dimensions| Depth | 520 mm |
|---|---|
| Width | 590 mm |
| Height | 55 mm |
| Weight | 11000 g |
| Cord length | 1 m |
| Installation compartment depth | 490 mm |
| Installation compartment width | 560 mm |
| Installation compartment height | 52 mm |
Precautions for preventing electrical shock during installation.
Warning about sharp edges and potential for cuts during operation.
General guidelines for safe installation and use of the appliance.
Diagram and labels for the top view of the induction hob.
Diagram and list of controls on the induction hob.
Initial steps and checks before operating the induction hob.
Instructions on how to operate the hob using the touch-sensitive controls.
Step-by-step guide on how to begin cooking with the induction hob.
Procedure for adjusting the total power output of the induction hob.
Instructions for setting direct cook procedures using the hOn App.
Special instructions and case for setting cooking recipes on the app.
Steps to activate and use the boost function for increased power.
Conditions and limitations for using the boost function on cooking zones.
Instructions for using the keep warm function to maintain food temperature.
Instructions for activating the flexible area as a single large cooking zone.
Procedure to lock the control panel to prevent unintended use.
Procedure to unlock the control panel and resume normal operation.
How to use the timer as a simple minute minder without affecting cooking zones.
Instructions for cleaning fingerprints, marks, and stains from the glass surface.
Method for removing difficult spills and burnt food from the glass surface.
Procedure for cleaning spills on the touch control panel to ensure functionality.
Troubleshooting guide for when the induction hob fails to power on.
Solutions for when the touch controls on the hob are not responding.
Causes and prevention methods for scratches appearing on the induction glass.
Troubleshooting tips for when the hob does not detect pans or heat them.
Troubleshooting steps for 'F3/F4' error code indicating sensor failure.
Troubleshooting for 'E1/E2' error codes related to abnormal power supply voltage.
Steps for 'E3' error code indicating high temperature of the induction coil sensor.
Troubleshooting for 'E5' error code indicating high IGBT temperature sensor.
Details on required work surface dimensions and heat-resistant materials.
Warning that the induction hotplate must be installed by qualified technicians.
