9 - Installation
EN
24
EN
9.9 Door Reversibility
Before connecting the appliance to the power supply you should check, whether the door
swing must changed from right (as delivered) to left, if this is required by the installation
location and the usability.
WARNING!
▶ The appliance is heavy. You need two persons to carry out the door reversibility.
▶
▶ Do not tilt the appliance more than 45 ° to prevent damage of the cooling system.
1. Provide necessary tool.
2. Unplug the appliance.
3. Remove hinge hole cover and hinge cover(available for
CUQS 513EWH/CUQS 513EW).
5. Removes 3 screws and hinge (available for CUQS
513EWH/CUQS 513EW).
8.
Remove cover in left side of door.
7. Open and remove the door.
Assembly steps
(Fig. 9.6):
1
2
9.6
10
3
4
6
5
7
8
9
4. Remove 2 screws in the back and the top cover(avail-
able forCUQS 58EWH/CUQS 58EW).
6. Removes 6 screws and 2 hinge (available for CUQS
58EWH/CUQS 58EW).
10.Turn the door upside down, remove 2 screws and
door stopper at the bottom of the door.
9. Fix the cover in right side of door.
1211
12.Tilt slightly backwards the cabinet, remove 3 screws,
the lower hinge and adjustable feet.
11.Fix door stopper dismounted last step to the other
side and 2 screws.
To Next Page
Loading...
