Candy EYT 1262DWE/1-S

Questions and Answers

J
John MorrowAug 9, 2025
Why Candy Dishwasher does not work / start?
- T
  Tyler KruegerAug 9, 2025
  Several factors can prevent your Candy Dishwasher from starting. First, ensure the appliance is correctly plugged into a working power socket and that the power is switched on. Test the socket with another device, like a lamp, to confirm it's functioning. Also, ensure the dishwasher door is fully closed. Verify that you've correctly selected the desired program and pressed the start button. Finally, check if the dishwasher is in pause or time delay mode.
S
scottkathleenAug 14, 2025
How to fix E2 error on Candy EYT 1262DWE/1-S Dishwasher?
- L
  Lisa WilliamsAug 14, 2025
  If your Candy Dishwasher displays error code E2 or the LEDs flash twice, ensure the water supply tap is fully open and the supply hose isn't bent, kinked, or trapped. Check that the drain pipe is at the correct height according to the installation instructions. Close the water supply tap and inspect the filler hose for a clean and unblocked "anti-sand" filter. Also, check the filter for clogs or foreign objects that may be obstructing water flow.
K
Kyle ChavezAug 25, 2025
Why Candy EYT 1262DWE/1-S Dishwasher leaked on the floor?
- M
  marcus58Aug 25, 2025
  If you see water leaking on the floor near your Candy Dishwasher, it could be due to a leak from the seal between the tap, supply hose, and fill valve. If this is the case, replace the seal and ensure the hose connections are tightened correctly. Also, make sure the front filter is correctly closed.
K
karen71Aug 29, 2025
How to fix E7 error on Candy Dishwasher?
- D
  Daniel PaceAug 29, 2025
  If your Candy Dishwasher displays error code E7 or the LEDs flash seven times, make sure the door is correctly closed and that no clothing inside prevents it from fully closing. If the door is locked, turn off and unplug the appliance, wait 2-3 minutes, and then reopen the door.
G
George SanchezSep 3, 2025
Why Candy EYT 1262DWE/1-S shows E4 error?
- P
  Paula RodgersSep 3, 2025
  If your Candy Dishwasher displays error code E4 or the LEDs flash four times, ensure you are using the correct amount of detergent and that the detergent is designed for use in a washing machine.
J
johnhurstSep 10, 2025
What to do if Candy EYT 1262DWE/1-S Dishwasher shows E3 error?
- L
  lisa02Sep 12, 2025
  If your Candy Dishwasher displays error code E3 or the LEDs flash three times, check the filter for clogs or foreign objects. Ensure the drain hose isn't bent, kinked, or trapped. Verify that your home drainage system isn't blocked by trying to drain water in the sink.