REMOVINGAND CLEANING OF WIRE RACKS
1. Removethe wire racks by pulling them in the directionof the arrows (see below)
2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are
dried afterwards.
3. After the cleaning processinstall the wireracksin reverse order.
4.3 Maintenance
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them
downwards.
3. Replace the window by carryingout the procedure in reverse.
REMOVAL OF THE OVEN WINDOW
1. Open the front window.
EN 11
To Next Page
Loading...
