EasyManuals Logo

Candy FIDC X100 User Manual

Candy FIDC X100
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
EN 5
the voltage, current and load indicated on the tag and having
the earth contact. The socket must be suitable for the load in-
dicated on the tag and must have ground contact connected
and in operation. The earth conductor is yellow-green in col-
our. This operation should be carried out by a suitably quali-
ed professional. ln case of incompatibility between the socket
and the appliance plug, ask a qualied electrician to substitute
the socket with another suitable type. The plug and the sock-
et must be conformed to the current norms of the installation
country. Connection to the power source can also be made by
placing an omnipolar breaker, with contact separation compli-
ant to the requirements for overvoltage category III, between
the appliance and the power source that can bear the maxi-
mum connected load and that is in line with current legislation.
The yellow-green earth cable should not be interrupted by the
breaker. The socket or omnipolar breaker used for the connec-
tion should be easily accessible when the appliance is installed.
The disconnection may be achieved by having the plug accessi-
ble or by incorporating a switch in the xed wiring in accordance
with the wiring rules.
lf the power cable is damaged, it should be substituted with a
cable or special bundle available from the manufacturer or by
contacting the customer service department. The type of pow-
er cable must be H05V2V2-F. This operation should be carried
out by a suitably qualied professional. The earth conductor
(yellow-green) must be approximately 10 mm longer than the
other conductors. For any repairs, refer only to the Customer
Care Department and request the use of original spare parts.
Failure to comply with the above can compromise the safety of
the appliance and invalidate the guarantee.
Any excess of spilled material should be removed before clean-
ing.
A long power supply failure during an occurring cooking phase
may cause a malfunction of the monitor. ln this case contact

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Candy FIDC X100 and is the answer not in the manual?

Candy FIDC X100 Specifications

General IconGeneral
BrandCandy
ModelFIDC X100
CategoryOven
LanguageEnglish

Related product manuals