EN 6
customer service.
• The appliance must not be installed behind a decorative door in
order to avoid overheating.
• When you place the shelf inside, make sure that the stop is di-
rected upwards and in the back of the cavity. The shelf must be
inserted completely into the cavity.
• When inserting the grid tray pay attention that the anti-slide
edge is positioned rearwards and upwards.
• WARNING: Do not line the oven walls with aluminium foil or sin-
gle-use protection available from stores. Aluminium foil or any
other protection, in direct contact with the hot enamel, risk
melting and deteriorating the enamel of the insides.
• WARNING: Never remove the oven door seal.
• CAUTION: Do not rell the cavity bottom with water during
cooking or when the oven is hot.
• No additional operation/setting is required in order to operate
the appliance at the rated frequencies.
• The oven can be located high in a column or under a worktop. Before
xing, you must ensure good ventilation in the oven space to allow pro-
per circulation of the fresh air required for cooling and protecting the
internal parts. Make the openings specied on last page according to
the type of tting.
• For a correct use of the oven it is advisable not to put the food in direct
contact with the racks and trays, but to use oven papers and / or special
containers.
To Next Page
Loading...
Need help?
General
