GB
Operation Instructions
1) Press " " once, the screen displays "P100".
2) to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press "
4) to adjust the cooking time until the oven displays "20:00".
5) Press " o
1. Clock Setting
When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
1) Press " " , the hour figures will flash.
4) to adjust the minute figures, the input time should be within 0--59.
5) Press "
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or to choose 80%
microwave power.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " ", the oven
will go back to the previous status automatically.
2. Microwave Cooking
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Press " ", the LED will display "P100". Press
" " for times or to choose the power you
" or "P10" will display for each added press.
again to start cooking.
Press " " or " "
Press " " or " "
time from 0:05 to 95:00. Press " "
to set cooking
Press " " or " "
Then press " " to confirm, and
want, and "P100", "P80", "P50", "P30
" to finish clock setting. ":" will flash, and the time will light.
twice
press " " or " "
press " " or " "
press " " or " "
" to confirm, and the screen displays "P 80".
" to start co king .
To Next Page
Loading...
