Candy MIG28TXNE - Microwave Cooking

GB
Operation Instructions
1) Press " " once, the screen displays "P100".
2) Press " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Press to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Clock Setting
1) Press " " twice, the hour figures will flash.
4) to adjust the minute figures, the input time should be within 0--59.
5) Press " " to finish clock setting. ":" will flash, and the time will light.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or press to choose 80% microwave
power.
Note: 1) If the clock is not set, the clock would not function when powered.
2) During the process of clock setting, if you press " ", the oven
will go back to the previous status automatically.
2. Microwave Cooking
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
confirm, and
to set cooking time from
"
"
again to start
cooking.
and "P100", "P80" "P50",
press "
" to
0:05 to 95:00. Press
When the microwave oven is electrified, the LCD will display "0:00", buzzer will ring once.
Press " " , t h e L C D will display "P100". Press " "
for times or to choose the power you want,
"P30" or "P10" will display for each added press. Then
,
12
o
r
" "
" "
o
r
"
"
"
Press "
o
r
" "
"
press
press
" "
o
r
"
"
" "
o
r
"
"
"
"
o
r
"
"