How to remove the oven door (fig. 9)
To make it easier to clean the oven, it is possible to remove the door from the hinges
as follows:
The hinges A are equipped with 2 mobile U-
bolts B.
When the U
-
bolts B are
lifted, the hinges are disconnected from their housing.
After this, lift the door up and pull it outwards, holding the door on both sides
near the hinges.
To re
-
install the door:
Slide the hinges into the grooves and open the door all the way.
Turn the mo
bile U
-
bolts to their starting position before closing the door
again.
Fig. 9
ATTENTION:
Please ensure that you do not remove the hinge locking system when you remove the
door. The hinge mechanism has a very strong spring. Never immerse the door in
water.
To Next Page
Loading...
