Need help?Do you have a question about the Cane Creek Helm MKII and is the answer not in the manual?
Lists tools required for installing the fork.
Lists tools required for maintaining the fork.
Details about the fork's physical specifications and dimensions.
Information on air pressure and coil spring rates.
Details on low speed and high speed compression, and rebound.
Information on volume reduction and travel adjustments.
Instructions for installing the crown race onto the fork.
Guide for measuring and cutting the steerer tube to length.
Procedure for installing the star nut into the steerer tube.
Steps for installing the stem and setting headset preload.
Instructions for installing the front brake caliper and cable guides.
Explanation and adjustment of low-speed compression damping.
Explanation and adjustment of high-speed compression damping.
Controls the speed at which the fork returns after compression.
Recommended air pressure settings for the Helm fork.
Lists the tools required for air volume adjustment.
Lists the tools required for internal travel adjustment.
Lists the tools required for changing the coil spring rate.
Lists the tools required for internal travel adjustment.
Details the one-year limited warranty coverage for suspension products.
Outlines the conditions and applicability of the warranty terms.
Lists common wear and tear parts not covered by the warranty.
Specifies the exclusive remedy and excluded damages under the warranty.
General| Brand | Cane Creek |
|---|---|
| Model | Helm MKII |
| Category | Bicycle Accessories |
| Language | English |
To Next Page
