Need help?Do you have a question about the Cane Creek Helm and is the answer not in the manual?
Measure the steerer tube twice and cut to length according to stem manufacturer's instructions. Do not install more than 30mm spacers below the stem.
Use a star nut setter tool to install a star nut into the steerer tube at a depth of 15mm.
Manages traction and chassis stabilization, affecting small bump sensitivity and brake dive.
Absorbs high impact forces, aiding bottom-out resistance and harsh landings.
Controls the speed at which the fork returns to normal height after a compression cycle.
General| Wheel Size Compatibility | 27.5", 29" |
|---|---|
| Spring Type | Air |
| Crown Material | Forged Aluminum |
| Spring | Air |
| Steerer Tube | Tapered 1.5" to 1-1/8" |
| Intended Use | Trail |
| Offset | 44mm |
| External Adjustments | low-speed compression |
| Brake Mount | Post mount |
To Next Page
