5
Tools Needed
Tools Needed For Installation:
• Saw for cutting steerer
• Crownrace setter (Recommended
Cane Creek part code HST005)
• Star Nut Setter (Recommended:
Cane Creek part code .TL1100 and
.TL1102)
• 2.5mm hex wrench
Tools Needed For Maintenance:
• 2.5mm hex wrench
• 13mm wrench
• 18mm wrench
• 22mm wrench
• 30mm wrench
Specialized tools and materials are
needed for the installation of your Cane
Creek parts. Installation of Cane Creek
parts by a qualified bicycle mechanic is
highly recommended.
To Next Page
Loading...
