SET-UP STEP 2STEP 1 STEP 3 STEP 4 PRE-RIDE CHECK
Prior to installing the quick-release skewer, review the included
documentation. The quick release skewer is comprised of ve major
parts: two conical springs; an adjusting nut; the skewer; and the lever
head.
Unthread and remove the adjusting nut and the neighboring conical
spring from the skewer.
While holding the quick-release skewer by the lever head, insert the
skewer into the wheel axle.
Place the conical spring back onto the skewer with the narrow end
pointing toward the wheel, then thread on the adjusting nut.
A.
B.
C.
D.
A
B
C
D
To Next Page
Loading...
