E16
4. Turning on the Power
NOTE
If a battery or adapter is used, the output voltage may be higher than the rated voltage depending on the manufacturers and
therefore the above voltages must be observed strictly. If a voltage outside the normal operation range is used, the lens may be
damaged.
Rated voltage : DC 12V
Normal operation range : DC 10V to 17V
Complied plug : EIAJ RC5320A TYPE4
And the external power supply input has the positive and negative polarities. Make sure to connect the power cable to the
correct polarity when connecting the batteries or the adaptors. Connecting the cable to the incorrect polarity may cause the
damage to the product.
• Power supply from the camera can be reduced by supplying the power to the external power supply input of the lens.
• When the power is supplied from the external power supply input, power supply from the camera is also required.
Turn on the camera, and the power of the lens will be supplied.
For the details of camera operation, refer to the operation manual of the camera.
To Next Page
Loading...
Need help?
General