26
Basic Functions
Turning the Power On /Off
• Press the ON/OFF Button until the
green power lamp lights.
- The upper indicator beside the
viewfinder will blink green.
- The lens will extend when the mode
switch is set to the
or position.
- The lens will retract approximately 1
minute after the mode switch is set
to
from the or position.
- The LCD monitor will always turn on
when the mode switch is set to the
or position.
• Press the ON/OFF Button again to turn
off the power.
• The Set Date/ Time menu will appear the first time the
camera power is turned on or whenever the charge of the
built-in rechargeable lithium date/time battery is low. Reset
the date and time when this occurs (p. 23).
• If the power-saving function activates, press the ON/OFF
Button to restore power.
Power Lamp
To Next Page
Loading...
