When
a
roll
of film is loaded, it
Then
as each
photograph
is
frame
by
frame. The number
continually displayed.
is wound
completely on the take-up
spool.
taken, the film rewinds into
the cartridge
of frames remaining
on the roll of film is
Infra-red film
cannot be used.
Please
use DX-coded film,
as the
camera uses this to automatically
detect and set the film
speed. Films
with a speed ranging from
ISO 25 to
5000
may be used.
Release the
command dial
lock
by
setting to
any
position
other than L.
Open
the back
cover by
raising
the
back cover release.
Tilt
the
film
cartridge
as shown
in
the diagram to insert.
The shutter curtain is
an extremely high-precision
mechanism
and
must
never be touched. When
loading film,
be
very
careful
not
to allow
your
fingers
or the
film
to come into contact with the
shutter
curtain.
Otherwise,
the
shutter curtain may
be
damages or bent.
\tt
To Next Page
