Canon EOS 500D - Fixing the Plug to the Camera

84
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Fixing the Plug to the Camera
Fasten the plug to the camera with the cable protector to prevent it from
detaching during remote shooting.
1
Open the cover, and connect the small plug of the
cable to the camera’s <A/V OUT / DIGITAL> terminal.
O Check the direction of the < > mark on the plug and push it
in.
2
Attach the cable protector in the order (1), (2).
1D X
1D Mk IV
1Ds Mk III
1D Mk III
1D X
Cable protector
(1)
(2)
Cable protector attached.
3
Remove the cable protector in the order (1), (2).
(1)
(2)
COPY