Canon F-710 - Calculation Range; Error Messages

1. ARGUMENT– A function does not have the correct number of
arguments.
2. DIVIDE BY 0
A. You attempted to divide by 0.
B. In statistics, n=1.
3. DOMAIN– You specified an argument to a function outside the
valid range. For example:
A. For : 0 or y<0 and x not an add integer.
B. For y
x
: y and x=0;y<0 and x not an integer.
C. For : x<0.
D. For LOG or LN : X 0.
E. For TAN : x=90, -90, 270, -270, 450, etc.
F. For SIN-1 or COS-1
|
x
|
>1.
G. For nCr or nPr : n or r are not integers 0.
H. For x! : x is not an integer between 0 and 69.
4. EQUATION LENGTH ERROR- An entry exceeds the digit limits
(88 for Entry Line and 47 for Star or Constant Entry lines); for
example, combining an entry with a constant that exceeds the limit.
5. OVERFLOW-
A.
| |
1E10, where is an angle in a trig, hyperbolic, or R P
(function).
B. Displaying when the entered value, executing result, memory
sum x exceed
|
X
|
>9.999999999x10
99
.
6. STAT –
A. More than 9999 statistical data point.
B. Statistical data point x, where
|
x
|
1E64
C. [2nd][ -] to remove the only data point.
D. Displaying when execute [ -]/[CSR] but without data.
E. Calculating
–
x, xn, or xn-1 with no data points or xn-1 with
one data point.
7. SYNTAX– The command contains a syntax error: entering more
than 23 pending operations or 8 pending values; or having
misplaced functions, arguments, parentheses, or commas.
The allowable result display in the lower line is 10 digits for a mantissa
and 2 digits for an exponent. However, calculations are internally
performed with a range of 12 digits for a mantissa and 2 digits for an
exponent.
Calculation range:
1 x 10
-99
~ 9.999999999 x 10
99
, and 0
Calculation Range
Error Messages
- 10 -