Preparations
ON/OFF(CHG) indicator
7 Charging will start when the
camcorder
is
turned off.
• The ON/OFF(CHG) indicator starts
flashing
in
red. The indicator will go
out when the charging
is
completed.
• If the indicator flashes quickly,
refer
to
Troubleshooting (OJ
93).
I
ONCE
THE
BATTERY
PACK
IS
FULLY
CHARGED
1 Disconnect the compact power
adapter from the camcorder.
2 Unplug the power cord from the
power outletand the compact
power adapter.
20
;
To
REMOVE
THE
BATTERY
PACK
1 Slide the battery compartment
cover away from the lens and
open it.
2 Press the battery release latch and
pull out the battery pack.
3 Close the cover and slide it toward
the lens until you hear a click.
o
IMPORTANT
• Turn off the camcorder before
connecting or disconnecting the
compact power adapter. After turning
off the camcorder, important data is
updated
in
the memory. Be sure
to
wait
until the ON/OFF(CHG) indicator turns
off.
•
We
recommend charging the battery
pack
in
temperatures between
10°C
and 30 °C (50
OF
and 86
OF).
Outside the
temperature range
of
0 °C
to
40°C
(32
OF
to
104
OF),
the charging will not
start.
• Do
not
connect
to
the camcorder's
DC
IN
terminal
or
to
the compact power
adapter any electrical equipment that is
not expressly recommended for use
with this camcorder.
To Next Page
Loading...
