Canon Image Prograf PRO-2000 User Manual

12
1
Enter the following URL in the web
browser of your computer to access the
website.
Note
• If you are using a Windows PC, you can also start this from the CD-ROM.
• When using Windows 10, Windows 8.1 or Windows 8, follow the procedure below
for start up the setup le after inserting the setup CD.
Click or File Explorer on the taskbar.
Select This PC or Computer on the left side of the opened window.
Double-click the CD-ROM icon on the right side of the window.
If the contents of the CD-ROM appear, double-click MSETUP4.EXE.
• If you have started from the CD-ROM, proceed to step 4.
The printer connection settings and software installation are performed using a computer.
However, if you selected Wireless LAN connection -> Yes -> No in steps 4 to 5 on p.10 or steps 1 to 2 on p.11, congure the wireless LAN settings only
using the printer. Proceed to "Congure Wireless LAN Settings on the Printer" on p.13.
2
Click Set Up.
Perform the remaining operations by
following the instructions on the screen.
3
Click Download to download the setup
les.
If a warning screen about downloading
appears, select Do not block, Allow, etc.
to proceed with the operation.
4
Run the le you downloaded and click
Start Setup.
Congure the settings by following the
instructions on the screen.
Note
• A screen for selecting the printer connection method may be displayed in the middle of conguring the settings.
If this happens, select the method you selected in step 4 on p. 10 or step 1 on p. 11 and then click Next and continue with the rest of the settings.
Wired LAN connection
This is the method for connecting the printer to the network using a LAN cable.
Wireless LAN connection
This is the method for connecting the printer to the network without using a cable.
USB connection
This is the method for connecting the printer to a computer using a USB cable.
Only 1 printer can be connected.
For the USB cable connection, rst select the connection method and then follow the instructions on the
screen.
5
When the following screen appears, you
can use the printer. Next, click Next to
proceed to installing the software.
6
When the following screen appears,
select the software to install and click
Next.
Congure the remaining settings by
following the instructions on the screen.
This completes the connection with the
computer.
Connect to the Printer

Canon Image Prograf PRO-2000 Specifications

General

Brand	Canon
Model	Image Prograf PRO-2000
Category	Printer
Language	English