Automatically Selecting an Appropriate Paper Source
for Each Function
1647-0HE
Enable or disable the automatic paper source selection feature for each paper source. If this feature is set to <On>, the
machine automatically selects a paper source that is loaded with paper of the appropriate size for each print job. Also,
when the paper in the selected paper source runs out, this feature enables continuous printing by switching from that
paper source to another that is loaded with the same paper size.
1
Select <Menu> in the Home screen. Home Screen(P. 122)
2
Select <Function Settings>
<Common>
<Paper Feed Settings>.
3
Select <Paper Source Auto Selection>.
4
Select the target function.
● When the target function is report/list printing or memory media print, select <Other>.
5
For each paper source to which you want to apply the automatic paper source
selection feature, select <On>.
● <Drawer 2> is displayed only when the machine is equipped with the cassette feeding module (option).
● Always specify <On> for at least <Drawer 1> or <Drawer 2>. If you specify <Off> for the both, then you
cannot nish the setting procedure.
6
Select <Apply>.
Basic Operations
169
To Next Page
Loading...
