Canon imageCLASS MF634Cdw - Page 502

<On>
<Action When Size Mismatch>
<Force Output>
<Display Error>
<Drawer 2>
*1
<Prioritize Driver Settings>
<Off>
<On>
<Action When Size Mismatch>
<Force Output>
<Display Error>
<Menu> <Function Settings> <Printer> <Printer Settings> <Prioritize Driver Settings When
Printing> Select the paper source Select <On> in <Prioritize Driver Settings> <Action When
Size Mismatch>
Select <Force Output> or <Display Error> <Apply>
<Force Output>
Continue printing even when the paper size setting in the printer driver and the loaded paper are largely
different.
<Display Error>
When the paper size setting in the printer driver and the loaded paper are largely different, an error message is
displayed and printing is stopped.
● If the printer driver's settings do not match the size and type of loaded paper with <On> selected, a
paper jam or printing error may occur.
<Copies>
Set the number of copies to print.
1 to 999
<Menu> <Function Settings> <Printer> <Printer Settings> <Copies> Set the number of
copies to print <Apply>
Setting Menu List
494