How to prevent text or images bleed through on Canon Printer scanner?
To prevent text or images from bleeding through from the back side of documents, try increasing the [Brightness] setting on the scanner driver's [Brightness] tab sheet. You can also enable the 'Prevent Bleed Through/Remove Background' setting. If the paper is very thin, consider photocopying the original and scanning the copy.
How to fix Canon Scanner that won't turn on?
If your Canon Scanner will not turn on, ensure the power cord is properly connected and that the power plug is plugged into a power outlet.
Why is my Canon Scanner ignoring driver settings?
If documents are not scanned according to the settings configured in the scanner driver for your Canon Scanner, edit settings in the [Select document] panel, or create a new [Select document] panel using the desired scanning conditions.
How to fix light characters that are blurred on Canon imageFORMULA DR-G2090?
If light characters are blurred (disappear), select the [Emphasize thin line] check box in the [Image control] tab in the scanner driver.
How to enable duplex scanning on Canon imageFORMULA DR-G2090?
To enable duplex (two-sided) scanning, go to the scanner driver's [Basic] tab sheet and set [Scanning Side] to [Duplex].
How to fix Canon imageFORMULA DR-G2090 pages that are missing in scan?
To address missing pages during scanning, decrease the likelihood of skipping blank page value. Also, try setting the [Scanning Side] to another mode, such as simplex or duplex.
Why is my Canon Scanner image abnormal in one application?
If the scanned image is abnormal in a particular application when using your Canon Scanner, try scanning with auto-detection disabled.
Why are pages missing when scanning with my Canon Scanner?
When pages are missing from your scan with the Canon Scanner, decrease the likelihood of skipping blank page value. Additionally, set the [Scanning Side] to another mode, such as simplex or duplex.
What to do if imprinter cover is open on Canon imageFORMULA DR-G2090 Printer?
If your Canon Printer imprinter cover is open, close the imprinter cover.
How to enable duplex scanning on Canon Scanner?
To enable duplex (two-sided) scanning on your Canon Scanner, set [Scanning Side] to [Duplex] on the scanner driver's [Basic] tab sheet. Note that if Scanning Side is set to [Skip blank page], images of blank pages are not saved.
Verify the scanner model before proceeding with setup.
Install necessary software for scanner operation.
Connect the scanner to the computer and power source.
Procedures for turning the scanner power on.
Crucial safety warnings and precautions for scanner operation.
Instructions and precautions for connecting the scanner to a power source.
Guide to using the CaptureOnTouch scanning application.
Routine cleaning procedures for the scanner and its parts.
Procedures for removing, reinstalling, and replacing rollers and separation pads.
How to replace ink cartridges, specify printing position, and clean the imprinter.
Solutions for frequently encountered scanner problems.
Procedures for handling paper jams, detection errors, and error messages.
General| Color scanning | Yes |
|---|---|
| Maximum scan size | 305 x 432 mm |
| Output color depth | 24 bit |
| Output grayscale depth | 8 bit |
| ADF scan speed (b/w, A4) | - ppm |
| Optical scanning resolution | 600 x 600 DPI |
| Duplex ADF scan speed (b/w, A4) | 200 ipm |
| Scanner type | Sheet-fed scanner |
| Product color | Black, White |
| Sensor type | CIS |
| Scan drivers | Kofax VRS, ISIS, TWAIN, WIA |
| Scanning noise level | 54 dB |
| Daily duty cycle (max) | 30000 pages |
| Maximum scan length | 3000 mm |
| Maximum ISO A-series paper size | A3 |
| Auto Document Feeder (ADF) media weight | 20 - 209 g/m² |
| USB version | 3.2 Gen 2 (3.1 Gen 2) |
| Standard interfaces | USB 3.2 Gen 1 (3.1 Gen 1) |
| Input voltage | 220 - 240 V |
| Power supply type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (sleep) | 3.5 W |
| Power consumption (typical) | 66.5 W |
| Operating temperature (T-T) | 10 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Standard input capacity | 300 sheets |
| Sustainability certificates | EPEAT Gold |
Weight and Dimensions| Depth | 569 mm |
|---|---|
| Width | 480 mm |
| Height | 315 mm |
| Weight | 25000 g |
To Next Page
