Canon imagePRESS Server G200 - Modify an Imagepress Server Address Book; Administrator Commands for Managing Address Books

Modify an imagePRESS Server address book
1 Specify or confirm the administrator email address at Configure > Job Submission > Print via email > Email
Setup > Administrator Email Address.
2
Log into an email application as the administrator specified in the first step, open a new message window, and
apply the plain text format.
3 In the To field, type the email address of the imagePRESS Server.
4 In the Subject field, type the command and the address book name.
5
If adding or removing addresses, list the addresses in the message field. To add or remove more than one address
at a time, list each address on a separate line.
6
Send the message.
The imagePRESS Server sends a response message that includes the relevant information.
Administrator commands for managing address books
Task Administrator email
subject field
Administrator email
message field
Response email
subject field
Response email
message field
View online
help for
address book
commands
#Help
(no content) Re: Help Information and
syntax for printing
by email and
modifying the
address books
To retrieve an
address book
#GetAddressBook
address book
For example:
#GetAddressBook Print
(no content) Address Book
address book
For example: Address
Book (Print)
List of addresses in
the specified
address book
For example:
Test1@company.co
m
Test2@company.co
m
To add an
address to an
address book
#AddAddressTo address
book
For example:
#AddAddressTo Print
name@domain or “display
name” name@domain
For example:
test3@company.com
Added to Address
Book address book
For example: Added
to Address Book
(Print)
List of addresses
added
For example:
Test3@company.co
m
Configuration and Setup
Configuring print job management settings
76