12. Make sure CPage Size on the Page Setup pane shows the original size as specified in CPaper Size in the Page
Attributes dialog box—in this case, ISO A3.
13. Specify additional printing conditions.
For details on available printing conditions, see "Printer Driver Settings (Mac OS X) →P.486 "
14. Confirm the print settings, and then click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Mac OS X) →P.491 "
• You can conserve roll paper by configuring settings suitable for the document.
For details on how to conserve paper and print, refer to "Conserving Roll Paper by Rotating Origi-
nals 90 Degrees (Mac OS X) →P.174 .
Printing from AutoCAD
Printer Driver Optimization Module for AutoCAD is software for printing optimally from AutoCAD with the printer driver.
By optimally controlling the processing resolution of raster data and the memory to be used in image processing of Auto-
CAD, printing superior in reliability and productivity is realized.
If you install Printer Driver Optimization Module for AutoCAD on a computer on which supported AutoCAD is installed, it
will be installed automatically.
Note
• Printer Driver Optimization Module for AutoCAD is applied automatically when you print from AutoCAD,
and optimal printing is performed.
Confirming the Installation of Printer Driver Optimization Module for AutoCAD
You can confirm whether Printer Driver Optimization Module for AutoCAD is installed by the following method.
1. From the File menu of AutoCAD, select Print.
Enhanced Printing Options
>
Printing CAD Drawings
>
iPF6300S Printing from AutoCAD
2
53
To Next Page
Loading...
Need help?
General