Removing sheets from the top paper feed slot
1. On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to select the Paper tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2. Press the OK button.
The Paper Menu is displayed.
3. Press â–² or â–¼ to select Eject Paper, and then press the OK button.
4. Press â–² or â–¼ to select "Yes", and then press the OK button.
The paper is ejected from the front of the printer.
Important
• If the trailing edge of a sheet is not ejected, pull the sheet out, keeping the front edge level. Acciden-
tally removing the sheet at an angle may scratch the printed surface.
Removing heavyweight sheets from the front paper feed slot
1. On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to select the Paper tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2. Press the OK button.
The Paper Menu is displayed.
3. Press â–² or â–¼ to select Eject Paper, and then press the OK button.
4. Press â–² or â–¼ to select "Yes", and then press the OK button.
As the printer ejects the paper, the paper is stopped momentarily with the trailing edge still held in the rollers.
5. Press the OK button.
The sheet can now be removed.
Handling Paper
>
Handling sheets
>
Removing Sheets iPF6300S
6
818
To Next Page
Loading...
Need help?
General