Important
• There may be ink around the ink supply section of ink tanks you removed. Handle ink tanks carefully during
replacement. The ink may stain clothing.
• Do not install used ink tanks in another model of printer.
This will prevent correct ink level detection, which may damage the printer or cause other problems.
• We recommend using up an Ink Tank in the course of printing within six months after breaking the seal.
Printing quality may be affected if you use older ink tanks.
• Do not leave the printer without ink tanks installed for extended periods (a month or more). Residual ink may
become clogged inside the printer and affect printing quality.
• If you pause printing to replace an ink tank, it may cause uneven colors in the printed image.
Confirm the message
When the ink level becomes low, a message is displayed on the Display Screen.
According to the message, replace the ink tank or prepare a new ink tank. (See "When to Replace Ink Tanks.")
→P.979
If a message requests you to replace an Ink Tank, press the OK button. In this case, you can skip the step Access the menu
for ink tank replacement. Follow the instructions in Remove the ink tanks.
Important
• Do not remove an Ink Tank during initialization immediately after turning on the printer, or during printhead
cleaning. Ink may leak out.
Note
• Ink Tank replacement is possible even when print jobs are being canceled or if paper is being advanced.
Access the menu for Ink Tank replacement
1. On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to select the Ink tab ( ).
Maintenance and Consumables
>
Ink Tanks
>
iPF6300S Replacing Ink Tanks
11
973
To Next Page
Loading...
Need help?
General