Paper loaded askew.
Cause Corrective Action
Paper loaded crooked was detected when the paper was advanced. Follow these steps to reload the roll.
1. Press the OK button.
2. Adjust the right edge of the roll to make it par-
allel to the orange Paper Alignment Line.
(See "Loading Rolls in the Printer.") →P.722
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.
(See "Loading Rolls on the Roll Holder.")
→P.718
Follow these steps to reload a sheet.
1. Press the OK button.
2. Pull out the sheet.
3. Adjust the right edge of the sheet to make it
parallel to the right Paper Alignment Line and
the trailing edge of the sheet to make it parallel
to the paper alignment line under the Paper Re-
tainer.
(See "Loading Sheets in the Feed Slot.")
→P.747
Note
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or
Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing prob-
lems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the
back of the next document when it is printed.
Paper not aligned with right guide.
Cause Corrective Action
When paper was loaded,
it was not aligned with the
guide on the right side.
Follow these steps to reload the sheet.
1. Press the OK button to clear the error.
2. Adjust the right edge of the sheet to make it parallel to the right Paper Alignment Line
and the trailing edge of the sheet to make it parallel to the paper alignment line under
the Paper Retainer.
Error Message
>
Messages regarding paper
>
iPF6300 Paper loaded askew.
12
985
To Next Page
Loading...
Need help?
General