12. Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, 10 in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Width, click L Printer Information on the
Main pane and update the printer information.
13. Make sure the C Page Size setting matches the original size as selected in CPaper Size in the Page Attributes
dialog box—in this case, 10"x12".
14. Select the D Enlarged/Reduced Printing check box.
15. Select the H Borderless Printing check box.
16. Click E Fit Paper Size under D Enlarged/Reduced Printing.
Enhanced Printing Options
>
Borderless Printing
>
iPF6300 Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X)
3
101
To Next Page
Loading...
Need help?
General