D X / E Y
Adjust the color balance as you check the color tone in the adjustment area.
You can adjust the square area in the center by clicking or dragging it.
Drag the vertical or horizontal scroll bars for adjustment, as desired.
You can click the arrows by the D X (horizontal) and E Y (vertical) boxes or enter the values directly.
F Brightness
Adjust the overall image brightness as desired. You can adjust the brightness if the printed document is lighter or darker
than the original image (that is, the original photo that was scanned or the original graphic as it appears on the computer
screen).
G Contrast
Adjust the contrast of the darkest and lightest portions relative to each other, as desired. Increasing the G Contrast makes
images sharper, and reducing the G Contrast softens images.
H Highlight
Adjust the brightness of the lightest portion.
I Shadow
Adjust the brightness of the darkest portion.
S Defaults
Click to restore all settings on the sheet to the default values.
Windows Software
>
Printer Driver
>
Gray Adjustment Sheet iPF6300
4
226
To Next Page
Loading...
Need help?
General