Setting Details
Roll Paper Select to print on roll paper.
Note
• When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become
defective depending on the paper used. If this happens, select another paper source.
Roll Paper Width
This selects the width of the roll media set to the printer.
Note
• Available only if rolls are selected in Paper Source.
Automatic Cutting
You can set the printer to cut roll paper automatically or print a guideline for cutting.
The following settings are available for automatic cutting.
Setting Details
Printer Default The value set on the printer operation panel takes priority.
None Each page is not cut after it is printed and printing continues without interruption.
Print Cut Guideline A print cut guideline is printed after each page and printing continues without in-
terruption.
Note
• Available only if rolls are selected in Paper Source.
Copies
You can input the number of print copies in numerical characters.
Note
• The maximum value is 999.
• You can change the numbers by clicking either ▲ button or ▼ button.
Mac OS X Software
>
Color imageRUNNER Enlargement Copy
>
iPF6300 Paper Settings Panel
5
587
To Next Page
Loading...
Need help?
General