4. Move the Width Guide (a) to match the size of paper loaded.
Set the Width Guide against the edge of the paper to prevent the paper from becoming crooked or wrinkled.
5. Press the OK button.
•
If a print job was received
After the paper is advanced, the printer starts printing the print job.
•
If no print job was received
The printer now starts feeding the paper.
Loading Heavyweight Sheets in the Front Paper Feed Slot
Important
• Always load POP Board in the Front Paper Feed Slot for printing. Loading it in other ways may impair op-
eration and damage the printer.
• Load only one sheet at a time.
Note
• Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
• Straighten paper if it is warped before loading it.
• Load the paper straight. Loading paper askew will cause an error.
• After loading the paper, you cannot move it laterally to reposition it. Load the paper straight.
Handling Paper
>
Handling sheets
>
Loading Sheets in the Feed Slot iPF6300
6
750
To Next Page
Loading...
Need help?
General