6. Remove the sheet, keeping the front edge level as you pull it out.
Caution
• If POP Board is accidentally removed at an angle, it may scratch the printed surface.
7. Press the OK button.
Caution
• Always remove the sheet before pressing the OK button. If you do not remove the sheet before step
7, it may go back inside the printer, leaving roller marks across the trailing edge of paper.
8. Lift the four Front Tray Guides above the Ejection Guide, store them toward the front, and then press the OK button.
Handling Paper
>
Handling sheets
>
iPF6300 Removing Sheets
6
757
To Next Page
Loading...
Need help?
General