6. Click the Page Setup tab to display the Page Setup sheet.
7. Select and click a roll paper in the L Paper Source list.
8. In the A Page Size list, click the size of the original as specified in the application. In this case, click ISO A4 or
Letter (8.5"x11").
9. Select the C Enlarged/Reduced Printing check box.
Note
• If the C Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the
B Borderless Printing check box.
Enhanced Printing Options
>
Printing enlargements or reductions
>
iPF6300 Resizing Originals to Fit the Roll Width (Windows)
3
69
To Next Page
Loading...
Need help?
General