Replace the Maintenance Cartridge
1. Remove the Ejection Guide.
2. Pull out the used Maintenance Cartridge by the grip (a). Holding the cartridge by the handles (b) on both sides, keep
the cartridge level as you remove it.
Caution
• Used maintenance cartridges are heavy. Always grasp the cartridge firmly and keep the cartridge lev-
el during removal and storage. If you drop a used Maintenance Cartridge or store it at an angle, ink
may leak and cause stains.
Important
• The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used
Maintenance Cartridge in another printer.
Maintenance
>
Maintenance Cartridge
>
iPF6300 Replacing the Maintenance Cartridge
10
921
To Next Page
Loading...
Need help?
General