Important
• During cleaning, use paper that does not generate much cutting dust, such as Plain Paper. It may affect print-
ing quality if you use film or other media that are more likely to generate debris when cut, or that have a
surface finish that may come off.
1. Turn the printer off. (See "Turning the Printer On and Off.") →P.819
2. Unplug the power cord from the outlet.
Caution
• Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally
leaving the printer on poses a risk of injury if you touch moving parts inside the printer.
3. Remove the Roll Feed Unit. (See "Removing the Roll Feed Unit.") →P.743
4. Fold a sheet of Plain Paper two or three times (a) and insert it under the Paper Retainer (b) from behind the printer to
wipe the entire surface of the Paper Retainer clean.
5. Attach the Roll Feed Unit. (See "Installing the Roll Feed Unit.") →P.744
6. Plug the power cord into the outlet.
Maintenance
>
Cleaning the Printer
>
iPF6300 Cleaning the Paper Retainer
10
931
To Next Page
Loading...
Need help?
General